Have you day-dreamed about having your own energy source? The answer is one that you can achieve by way of using a wood gasifier When used wood gasifer this could be wonderful machine to build electric power in eco-friendly process. KEXIN will guide you on how can be a wood gasifier built at home.
Building a wood gasmans doesn't have quite the same derring-do. Before we get started there are a few things that you absolutely must have. Get metal drum, pipes these all tools which will be required to have this complete assembled together. Well, now that you have everything in hand – here is an equally direct DIY step by step on how to build your wood gasifier.
Tip 1: The first step is you need a metal drum. This drum is the must have part from your gasifier. Drill Hole In Side Of Drum This is the hole your airflow tube will go through to exit out of your drum. Well, that is because the wood must burn with air. Next, you will have to make another cut on top of the drum. For this, they will make a hole and insert the outlet pipe fr smoke. Make sure that the pipes you cut slide into those holes airtight or… This will keep everything working correctly.
Step Two-After your drum and pipes are assembled, load the drum with chips. They must be short, dry — as wooden splinters. The more cut to the chip, the more efficient burning bioenergy in small fragments. Make sure to pack the chips down, again; they all have fit inside of that drum.
Step 2 – Setting the Wood Chip Fire Get some paper or throw a few drops of kerosene to light as fire. Of course, burn the mourner down at some point! Once the wood chips are smoking, slap a lid on there to give them time to smolder. Due to which the heat will stay inside and have better rusting emboss process.
Step 4: When you get a fire burning, sit back and watch the smoke pouring out of those pipes. When it has some color to it, usually about 30 minutes later from now with the dark black smoke. Seeing clear smoke just mean that your gasifier is running smoothly. Should a gas after it is digested, in another stage produces s gas form that could be vented to fuel your generator for even more power on site.
Step 1: This will need to be a metal drum in the same way as previously. Step Drill the hole on all of its side with a holesaw for air vents and burn through it are lid to allow smoke exit. It should just fit so snug into the two holes that nothing will leak.
Telif Hakkı © Qingdao Kexin New Energy Technology Co., Ltd. Tüm Hakları Saklıdır - Blog - Gizlilik Politikası
EN
